An eucalyptus oil producer in Central Victoria requires a shell and tube heat exchanger to cool the oil from 140°C to 50°C. Cooling water, in the tubes, at 15°C is available, and can be heated to 45°C. The oil flowrate will be 40 tonnes hour.
Cast Iron End Bonnets. To get a quote or place an order for please contact us:1-888-226-8522. HC-824-4-4-Fis Shell and Tube Heat Exchanger used to cool compressor oil with cooling water. Replacement oil coolers for the following compressor manufactures:Tecumseh, Quincy, Campbell Hausfeld, Chicago Pneumatic, Ingersoll-Rand, Jenny, Maxus, Powerex, Rolair, Atlas Copco, Sullair, Gardner Denver, Section 5.4 Shell and Tube Heat Exchanger CorrectedA miniature shell-and-tube heat exchanger is designed to cool engine oil in an engine with the engine coolant (50% ethylene glycol). The engine oil at a flow rate of 0.23 kg/s enters the exchanger at 120°C and leaves at 115°C. The 50% ethylene glycol at a rate of
Parker Shell & Tube Oil Coolers have been engineered to the highest quality standards and provide excellent performance and reliability. The design of the shell & tube cooler is ideal for high flow applications, as well for use with sea water or other types of corrosive fluids. These water coolers are available with a wide variety of material Shell and Tube Heat Exchanger Engine Transmisson Oil Hydraulic Oil Coolers EC Shell and Tube Heat Exchanger for Oil Cooling 3/4" & 3/4" from $18.00 Boat Engine Oil Coolers 5" & 2 1/2'' BSPT, JK Type Transmission Oil Cooler for Fresh Water
Also known as shell and tube heat exchangers, these transfer heat using liquid or steam that flows through the shell to heat or cool liquid in the tubes. Theyre commonly used in refrigeration and engine cooling systems. Btu/hr. cooling capacity is based on cooling 180° F process water with 85° F water and a 10 psi pressure difference. Heat exchangers with a 316 stainless steel shell and U-Tube Steam to Liquid Heat Exchangers Taco U-Tube Steam to Liquid Heat Exchangers are designed, constructed and tested to ASME Section VIII, Div. 1 requirements. Computerized product selection helps you choose the heat exchanger that is just the right fit for your application requirements. U-Tube Steam to Liquid Heat Exchangers are available in a wide range of materials to meet
Also known as shell and tube heat exchangers, these transfer heat using liquid or steam that flows through the shell to heat or cool liquid in the tubes. Theyre commonly used in refrigeration and engine cooling systems. Btu/hr. cooling capacity is based on cooling 180° F process water with 85° F water and a 10 psi pressure difference. Heat exchangers with a 316 stainless steel shell and Water/oil heat exchanger - All industrial manufacturersshell and tube heat exchanger "E" range. water/oil water/water compact. shell and tube heat exchanger. "E" range. Operating pressure:max 16.0 bar. Temperature:max 150.0 °C. Our new brand of heat exchangers has been designed to meet industrial hydraulic requirements, while keeping all MOTA products' advantages.
You will see these heat exchangers used in common application such as cooling hydraulic oil on a power unit, water glycol on engines, air or gases downstream of a compressor, condensing steam, vaporizing gases, and heating gases or fluids up. Commercial standard heat exchangers, typically a fixed tube bundle such as a BEM or BEU, usually have a 300 psig 300 F pressure/temperature rating on the shell and 150
Your email address will not be published.*